RiteAV – 3.5mm to RCA Stereo Female Cable – 6 inch
Cables To Go – 03182 – 3.5mm Stereo Female to RCA Male Y-Cable
When it comes to getting to know and understand what professional equipment is with balanced audio cables and if they are really bringing the right amount of quality with them. With the professional equipment, there is now going to be a connector which is greater than before of course and that is because the cables can work better as well as having a greater range than before.
Some people believe that with the three pin connectors then they are going to have only one ground a single one and the others will head off to the other two on the right and left of the connector also. However that is completely wrong, if you find a balanced audio cable then it is going to be a mono signal that will require two balanced cables however.
These are supposed to be able to stop any interference from any other electrical which may be interfering with the signals. There is going to be a lot more noise running through the cables with the longer cables. Unlike the shorter cables, they can keep the noise to a minimum, which takes out any interference with the signals.
– Explanation of Balanced Audio Cables
When you use this balanced audio cable set up then it is really there to help stop a lot of signals interfering with one another and tries to take out some of that unwanted noise with the systems. Remember they are both doing to have the decoder which will then know there are two different signals but it is very complicated still.
When it comes to regular signals and balanced audio signals, they are very different in deed and even though you could say they are a little alike to work with some balanced equipment they will not always going to be reliable.
You could even put your balanced signal through to one which isn’t balanced at all or even some of the unbalanced equipment however doing so will mean that the noise protection will be gone completely so think about that before doing so.
There are of course a lot of practical issues for many consumers today, so think about if you are going to want to go for an actual balanced audio for the camcorder of your choice and if you do then you are going to have to find a good adapter box. That should also have the amplification circuitry so that you are able to decode and create balanced audio with the camcorder.
These adapter cables can help you and not just for stopping any unwanted noises on the films, they can really help. For many audiophiles then they are not really going to want to look for them to be used with the balanced audio features. You will have to look for your adapter boxes first; they are going to be very expensive and they are more than likely to add some distortion to the sound.
You want to have the balanced audio because they should be able to run the signals over long distances and that is why with shorter distances then you should think about going to short shielded cables instead.
audiocable 